BTduino - Arduino - Bluetooth1.7 - Google Play

Free Version

Disclaimer
Description

Official Google Play Link

We do not host BTduino - Arduino - Bluetooth on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.

The Google Play link for BTduino - Arduino - Bluetooth is provided to you by soft112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.

If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of soft112.com contact us.

Publisher Description

BTduino 是利用手機藍芽裝置(Bluetooth)連接 Arduino 的應用程式。此程式現提供數字按鍵模式及遊戲控制器模。往後亦會加入PWM，各種感應器及按鍵配對等功能。使用者需連接藍芽接收裝置如HC06至Arduino。藍芽HC06連接Arduino的設置如下：
1. 藍芽VCC接Arduino 5v或3.3v(視乎所購買的裝置而定)
2. 藍芽GND接Arduino GND
3. 藍芽RXD接Arduino TX(Pin10)
4. 藍芽TXD接Arduino RX(Pin11)
// Arduino RX(Pin 11) connect to Bluethooth TX, Arduino TX(Pin 10) connect to Bluethooth RX

Arduino 設定
/*
btduino2 - Terminal Mode - by David Chung
*/
#include

SoftwareSerial myBT(11, 10);
const int ledPin = 13;
String inCode = "";
boolean endCode = false;

void setup() {
Serial.begin(9600);
myBT.begin(9600);
pinMode(ledPin, OUTPUT);
inCode.reserve(50);
}

void loop() {
if (myBT.available()) {
char incomingChar = myBT.read();
if(incomingChar == ')'){
endCode = true;
} else {
inCode += incomingChar;
}
}

if (endCode){
int strEnd = inCode.indexOf(')');
String myString = inCode.substring(0, strEnd);

Serial.print("Incoming : ");
Serial.println(myString);

if(myString == "on"){
digitalWrite(ledPin, HIGH);
myBT.print("LED On");
}
if(myString == "off"){
digitalWrite(ledPin, LOW);
myBT.print("LED Off");
}

inCode = "";
endCode = false;
}
}

/*
btduino2 - GamePad Mode - by David Chung
*/
#include

SoftwareSerial myBT(11, 10);
const int ledPin = 13;
int incomingByte = 0;

void setup() {
Serial.begin(9600);
myBT.begin(9600);
pinMode(ledPin, OUTPUT);
}

void loop() {
if (myBT.available()) {
incomingByte = myBT.read();
Serial.println(char(incomingByte));
if(incomingByte == 'L'){
digitalWrite(ledPin, HIGH);
}
if(incomingByte == 'R'){
digitalWrite(ledPin, LOW);
}
}
}

/*
Slider Mode
*/
#include

SoftwareSerial myBT(11, 10);
const int ledPin = 13;
String inCode = "";

boolean endCode = false;

void setup() {
Serial.begin(9600);
myBT.begin(9600);
pinMode(ledPin, OUTPUT);
inCode.reserve(30);
}

void loop() {
if (myBT.available()) {
char incomingChar = myBT.read();
if(incomingChar == ')'){
endCode = true;
} else {
inCode += incomingChar;
}
}

if (endCode){
int comma1 = inCode.indexOf(',');
int comma2 = inCode.indexOf(',', comma1 + 1);
String Rs = inCode.substring(0, comma1);
String Gs = inCode.substring(comma1 + 1, comma2);
String Bs = inCode.substring(comma2 + 1);

Serial.print("inCode = ");
Serial.print(inCode);
Serial.print(" R = ");
Serial.print(Rs);
Serial.print(" G = ");
Serial.print(Gs);
Serial.print(" B = ");
Serial.println(Bs);

int R = Rs.toInt();
int G = Gs.toInt();
int B = Bs.toInt();

analogWrite(ledPin, R);

inCode = "";
endCode = false;
}
}

/*
btduino2 - Orientation Mode - by David Chung
*/
#include

SoftwareSerial myBT(11, 10);
const int ledPin = 13;
String inCode = "";
boolean endCode = false;

void setup() {
Serial.begin(9600);
myBT.begin(9600);
pinMode(ledPin, OUTPUT);
inCode.reserve(30);
}

void loop() {
if (myBT.available()) {
char incomingChar = myBT.read();
if(incomingChar == ')'){
endCode = true;
} else {
inCode += incomingChar;
}
}

if (endCode){
int comma1 = inCode.indexOf(',');
int comma2 = inCode.indexOf(',', comma1 + 1);
String As = inCode.substring(0, comma1);
String Ps = inCode.substring(comma1 + 1, comma2);
String Rs = inCode.substring(comma2 + 1);

Serial.print("inCode = ");
Serial.print(inCode);
Serial.print(" Azimuth = ");
Serial.print(As);
Serial.print(" Pitch = ");
Serial.print(Ps);
Serial.print(" Roll = ");
Serial.println(Rs);

int A = As.toInt();
int P = Ps.toInt();
int R = Rs.toInt();

inCode = "";
endCode = false;
}
}